I installed the evo one remote starter in my 2011 Mitsubishi Outlander Sport push to start folowing the instalation guide but the car doesn't want to start. I am using the 3x lock buttonon myoem remote to start the car. I already program function 38 for that and 31 for the lightswith the flashlink. Car is automatic transmission and i cut the yelow loop wire. The module was succesfully programed. I have the solid blue light then i pressed the push to start button twice and i got blue light flashing which according to the guide is programmed. When i try to start the car the evo one module start with red light then yelow and blue and then it stops. I have nothing lighting on the dash and my push to start button on the car is flashing orange and then it stops.I double checked all the wirings. I also tried with firmware 4.18 but with this firmware the evo one is not doing anything at all when i press 3x lock button to start it. Is there specific firmware for my car that i have to use? Also i notice that the pink ignition wire is not connected to the car ignition. Is that supposed to be like that?