My car is Regal 2010 flip key with auto transmission
I got EVO-All and THAR-GM1V2, everything is well installed. Firmware is upgraded to latest version of this car.
When I follow the programming guide <evo-all_(firmware_4.18_hardware_6_and_more_required)_thar-gm1_v2_(t-harness).rev-20130509> step4, that is a long step, some actions requires to be finished within 5 second.
When I finish step4 within 5 seconds, the yellow light keeps on and red light flash rapidly, which is differenct as guide shows.
Please help. What should I do?
Add more info
I want to use it with oem remoter.
The issue I described above was follow the programming guide. And it was not success as I mentioned.
Then I tried to follow the decryptor guide. It's also difference as the guide shows. In the guide the last status should be blue light flash rapidly then remove the key blue light flash slowly. In my case the blue light keep light on before and after remove the key.
However I still finish the whole process with flash link updater. When I reconnect the 4-Pin connector back after all the remaining connector, both red, yellow and blue light keep flash. I don't know whether the status is correct or not.
When I push unlock button 3 times, nothing happen.
Any more info needs, please let me know.