I have programmed and installed an Evo-One using THAR-ONE- TOY1 harness in my 2009 Toyota RAV4, automatic transmission, standard key (dot key).
Module S/N: 002B04211739
Bypass Firmware: 79.49, https://photos.app.goo.gl/PbEQgYMP1RPx6PgA8
Remote starter firmware: 1.25, https://photos.app.goo.gl/DkLyv2ttWCip77wS7
I have double checked the wiring connections, and seems everything is good.
Image 1: https://photos.app.goo.gl/uPvX8uTQnyqcuEyU9,
Image 2: https://photos.app.goo.gl/TH6jQ8A2BPpa6H7P9
I can start the car remotely using the OEM keys. I would like to use the RFK442. I have tried to programming/pairing the RFK442, unfortunately I could not able to proceed after steps 3, page 2 in the following RFK442 programming manual.
The problem is: at step 3, the antena LED blinks once and then goes away (but the instruction says "The LED will turn ON").
At step 4, when I press the brake paddle 4 times, the antena LED doesn't response or no rapid flashing (instruction says "The LED will flash rapidly"). It seems like the RFK442 can not communicate with the Evo One.
I appreciate if you have any suggestion to overcome this issue and complete programming the RFK442 with the Evo One.