Quick Vehicle Finder
Find the right solution for your vehicle

Questions & Answers

blue led doesn't stay lit while trying to program

0 votes
Can't get past first step of programming. I release the button while the led is blue but it goes out.
asked Nov 30, 2021 in Chevrolet by Brian Deal (130 points)

1 Answer

0 votes
I would check to see if there is power present on the yellow wire of the 20 pin connector. That wire should only have power when the key is on.
answered Nov 30, 2021 by derek ! (279,170 points)
It doesn't have power until the key is on. I have tried a bunch of times to get this programed. I suspect it may be a faulty module.
If it is an evo-one you would also want to check the large pink wire on the 6 pin for the same criteria.

 

Also ensuring you have the correct firmware flashed into the unit for the installation type and vehicle being worked on is a good thing to double check.
...

Wirecolor.com

the ultimate online tool

Visit wirecolor.com for wiring information and photographs providing detailed installation processes.

Email Sign Up

Get products & corporate
updates with our newsletter.