2020 Hyundai Elantra standard key no remote start.
using fortin model evo-one
Bypass firmware 76.59
Remote start 1.25 firmware
Hardware inside 7.0
There is no pats wire to hook up. CAN high and low hooked up yellow automatic transmission wire cut for Automatic. Used suggested options. Did programming for blue light option 2. The blue light comes on steady. when plug in main harness. Plug in the CAN wire connector and plug in 20 pin connector. Turn ignition on and blue light flashes rapidly. Turn the ignition off blue light goes out. Try to remote start on the facotry remote push the lock fob button 3 times and no remote start. Tried option 20.2 and no luck, based on some search here on the forum. Any advice thank you