EVO-ONE Status
EVO-ONE Status
Service No: 002B03007847
Preload date: 40-2014
Hardware version: 3
Firmware version: 1.24
RS232 protocol: FORTIN
Vehicle: Toyota Highlander 2015 - H-Key
EVO-ONE Options
2. Programmable Output (+) Ign/Acc/Start (FUNCTION 31 MODE 4) Configure main harness outputs as required. |
2.1
|
White: (+) Ignition2, Orange: (+) Accessory, Pink: (+) Ignition, Yellow: (+) Start. |
2.2
|
White: (+) Accessory2, Orange: (+) Accessory, Pink: (+) Ignition, Yellow: (+) Start. |
2.3
|
White: (+) Start2, Orange: (+) Accessory, Pink: (+) Ignition, Yellow: (+) Start. |
2.4
|
White: (+) Start, Orange: (+) Ignition2, Pink: (+) Ignition, Yellow: (+) Start2. |
3. Tachless sensivity |
3
2
1
-1
-2
-3
|
Increase / Decrease crank time. |
4. Remote car starter runtime Select required remote start runtime. |
4.1
|
Gas: 15 minutes
Diesel: 30 minutes |
4.2
|
Gas: 7 minutes
Diesel: 14 minutes |
4.3
|
Gas: 3 minutes
Diesel: 6 minutes |
6. Door Lock before and after remote-start |
6.1
|
NO |
6.2
|
Unlock before remote-start
& Lock after remote-start. |
6.3
|
Lock after remote-start. |
OFF
6.4
|
Unlock and relock after shut-down. |
OFF
6.5
|
Relock 10 sec. after shut-down. |
7. Safety Locks |
7.1
|
NONE |
7.2
|
Lock after foot-brake & unlock after key is turned off. |
7.3
|
Unlock after key is turned off. |
OFF
7.4
|
Doorlock Output at Ignition only. |
8. Unlock Pulse Time |
8.1
|
Single 0.25 sec pulse. |
8.2
|
Double 0.25 sec pulse. |
8.3
|
Single 4.0 sec pulse. |
8.4
|
Single 2.5 sec pulse. |
8.5
|
Single 1.5 sec pulse. |
8.6
|
Single 0.75 pulse. |
9. Active or Passive Starter Kill |
9.1
|
Active. Press LOCK to activate the Alarm and starter-kill. |
9.2
|
Passive (Lock disabled). Arm alarm activate starter-kill 30 seconds after the door is closed. |
9.3
|
Passive (Lock enabled). Arm alarm, activate starter-kill and lock doors when the door is closed. |
9.4
|
Passive arm 30 seconds (by default if MODE 2 ot 3 is activated. |
9.5
|
Passive arm 60 seconds. (if
MODE 2 ot 3 is activated. |
9.6
|
Passive arm 120 seconds.
(if MODE 2 ot 3 is activated. |
11. Confirmation Siren/Horn confirmation chirp and LED programming. |
11.1
|
Silent on 1st LOCK/UNLOCK press. Sound on 2nd LOCK/UNLOCK press. Antenna LED active. |
11.2
|
LOCK/UNLOCK sound always. |
OFF
11.3
|
Antenna LED disabled. |
OFF
11.4
|
Antenna LED disabled
with ignition. |
OFF
11.5
|
Horn lock only. |
OFF
11.6
|
Panic Disable |
12. Sound Confirmation |
12.1
|
Horn Only. Output programmed to be used for vehicle horn. |
12.2
|
Siren (+). 5th relay require. |
OFF
12.4
|
Siren Only. Output programmed to be used with aftermarket sirens. |
13. Pulse Confirmation Length of audible sound. |
13.1
|
Long |
13.2
|
Short |
14. Alarm and Starter Options |
14.1
|
Alarm disabled. Remote-starter enabled. |
14.2
|
Alarm enabled, Remote-starter enabled. |
14.3
|
Alarm enabled. Remote-starter disabled. |
15. Smart Door Lock Smart door lock relocking and alarm rearming. |
15.1
|
Disable |
15.2
|
(Unlock signal)
Automatically LOCK and rearm alarm if door(s) are not opened after 30 seconds. |
15.3
|
Lock when starter kill arms. |
OFF
15.4
|
Arm pulse only when the alarm is disarmed. |
16. Cold Start Timer Vehicle starts every x hours with temperatures below -5 Celcius for the programmed run time. |
16.1
|
3 hours at 5 Celsius / Runtime (Option 4). |
16.2
|
1.5 hours at 5 Celsius / Runtime (Option 4). |
16.3
|
3 hours at 5 Celsius / 5 minutes. |
16.4
|
1.5 hours at 5 Celsius / 5 minutes. |
16.5
|
Cold time OFF |
18. Diesel Mode |
18.1
|
Disable |
18.2
|
Enable (20 seconds) Delay between Ignition power up and Starter (crank). |
18.3
|
Enable (10 seconds) Delay between Ignition power up and Starter (crank). |
18.4
|
Enable. No delay between Ignition power up and Starter (crank). |
19. Turbo Mode Will leave engine running for a desired amount of time after shutting down the vehicle. |
19.1
|
Disable |
19.2
|
Run 2 minutes. |
19.3
|
Run 4 minutes. |
20. Engine Supervision Tachometer settings. |
20.1
|
Tachless on crank and supervision by Tach Data-Link |
20.2
|
Tachless only. |
20.4
|
Start (crank) 8 seconds on Tachless. |
20.5
|
Start (Crank) 8 sec + Supervision by Data-Link Tach. |
20.6
|
Tach Data-Link only. |
21. Start Attempts |
21.1
|
2 times. |
21.2
|
1 time. |
21.3
|
3 times. |
24. Special Applications See vehicle installation guide for Option 24. |
24.1
|
Disable |
24.2
|
Application 1 |
24.3
|
Application 2. Turn OFF the engine when the door is open. |
24.4
|
Application 3. Turn OFF the engine when the foot-brake is pressed. |
OFF
|
25. Yellow/Black (A13) : Aux1 --> LOCK |
25.1
|
0.5 seconds & disarm alarm. |
25.2
|
0.5 seconds. |
25.3
|
10 sec latch or until a button is
pressed. |
25.4
|
20 sec latch or until a button is
pressed. |
25.5
|
30 sec latch or until a button is
pressed. |
25.6
|
Latch until shutdown. |
26. Hybrid Mode Turn on for hybrid vehicles. |
26.1
|
Gas / Diesel vehicle. |
26.2
|
Hybrid vehicle |
29. Alarm duration Amount of time the alarm will sound if triggered. |
29.1
|
30 seconds. |
29.2
|
60 seconds. |
29.3
|
120 seconds. |
30. Valet Code Controls how to enter valet mode. |
30.1
|
Ignition ON + 3x valet button |
30.2
|
Ignition ON + 3x valet button + 1x for 3 seconds |
30.3
|
Ignition ON + 4x valet button + 1x for 3 seconds |
30.4
|
Ignition ON + 5x valet button + 1x for 3 seconds. |
30.5
|
Ignition ON + 6x valet button + 1x for 3 seconds. |
30.6
|
Ignition ON + 7x valet button + 1x for 3 seconds. |
31. Special application Programmable ouput (+) OFF: Priority on Function 2. |
31.1
|
Disable |
31.2
|
Enable at ground out.
Disable with ignition off.
Special application - Function 2 (all options) will not be available. |
31.3
|
White wire: (+) Trunk Ouput
Special application - Function 2 (all options) will not be available. |
31.4
|
WHITE: (+) Parking Lights, ORANGE: (+) Accessory, PINK: (+) Ignition, YELLOW: (+) Starter |
31.5
|
WHITE: (+) Parking Lights, ORANGE: (+) Ignition2, PINK: (+) Ignition1, YELLOW: (+) Start |
31.6
|
WHITE: (+) Parking Lights, ORANGE: (+) Parking Lights, PINK: (+) Ignition1, YELLOW: (+) Start |
32. Ground Out |
32.1
|
Shut-down 1s after remote start run time. Dark Blue wire (ground out) |
32.2
|
Shut-down 3s after remote start run time. Dark Blue wire (ground out) |
32.3
|
Shutdown after start. Dark Blue wire (ground out) |
32.4
|
Starter-Kill. Dark Blue wire (ground out) |
32.5
|
Arm/Rearm. Dark Blue wire (ground out) |
32.6
|
Bypass Control (ground out) |
33. Manual transmission Ready Mode Activation For use with manual transmission vehicles. |
33.1
|
Activated by remote starter remote. Ready mode activated with the starters remote. |
33.2
|
Automatically activated by hand-brake and Foot Brake (ON). Not functionnal on tachless. Tach must be connected. |
OFF
33.3
|
Shutdown when lock with remote. |
OFF
33.4
|
Hatch Detection Enable |
34. Trunk Output Trunk output special programming. |
34.1
|
Pulse 0.5 seconds. |
34.2
|
Pulse 2.5 seconds. |
34.3
|
Unlock before trunk pulse, 0.5 second. |
OFF
34.4
|
Trunk Output at ignition
only |
35. Door unlock Special application |
35.1
|
Disable |
35.2
|
Activate vehicle ignition at unlock. |
35.3
|
Activate vehicle ignition and accessory at unlock. |
36. Activation/Desactivation remote Valet Mode |
36.1
|
By remote : Lock + unlock or Valet button. |
36.2
|
By remote : AUX --> Lock + Unlock or valet button. |
36.3
|
By Valet button only. |
37. Security Remote car starter Special application |
37.1
|
Disable |
37.2
|
Security ON: Shutdown Engine if the door is opened before UNLOCK is pressed. Door trigger required. |
38. System control by OEM Remote Enable Press 3x Lock to remote start. OEM Remote Monitoring required as a compatible feature on the vehicle you are working on. |
38.1
|
Disable |
38.2
|
Enable (Press 3x Lock to remote start) (Bypass module required). |
OFF
38.3
|
Trigged to Start |
38.4
|
Enable Control by OEM Remote. |
38.5
|
Enable: Press
Lock-Unlock-Lock to remote start. (Bypass module required). |
39. Temperature option |
39.1
|
Disable |
39.2
|
Enable : AUX1 activated at 5 Celsius when remote started (see function 25). |