I installed EVO-ALL in a 2017 Infiniti QX70 with THARN-NIS1 harness using guide #90131. It is a stand alone remote starter programmed with 3X lock on OEM fob to remote start the car. The brown wire from the T harness is connected to the only red wire(pin 8) on the only 10-pin white connector at the BCM as it is depicted in the installation guide. I also confirmed with WIRECOLOR.COM picture and diagram, the red wire is the parking light wire for the car.
I test the brown with a meter when the car has remote started and I don't see 12V at the brown wire. I see 12V on the red wire when I turn the car light switch to parking light position.
Should there be 12V on the brown wire from the THARN-NIS1 harness when the remote is running the car?
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
