just bought a remote start for my 2007 dodge ram 3500 with the 5.9L diesel. i bought the Evo-all module with evo-chrt5 harness along with the flashlink updater 4 and the RF-ALL 642W remotes. i followed the direction giving but cant seem to get the module to power up. i have the T-harness pluged into the only locating it can go, have both postive yellow wires connected(one from the harness and one form the 20 pin connecter side). then connected the puple wire form the harness to the green and red wire on the 20 pin connecter side. i am getting power to ther yellow wire but not getting anything to the purple and green/red wire. No light have came on on the module at all, and i tryed hooking it up to the flashlink updater and the module still wont light up or connect. flashlink has been updated and is function as it says it should, but module cannot be detected.
Any help would be apprecaited thanks.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
