Quick Vehicle Finder
Find the right solution for your vehicle

EVO-ONE Status

EVO-ONE Status

Service No: 002B04171979

Preload date: 12-2021

Hardware version: 4

Firmware version: 0.20

RS232 protocol: FORTIN

Vehicle: Lexus IS 250 2006 - Push-to-Start

EVO-ONE Options

OFF
ON
*** Settings protection
Prevent options reset from a Master Reset.
OFF
ON
A1 - Door locks
Door lock & unlock control.
OFF
ON
A2 - Trunk Release
Trunk / hatch release.
OFF
ON
A3 - Key Bypass
Immobilizer bypass.
OFF
ON
A4 - Heated seats
Automatic low temperature heated seats & rear-defrost control.
OFF
ON
A5 - Aux. 1
Vehicle specific function. (e.g. Right Sliding Door, Power Lift Gate).
OFF
ON
A6 - Aux. 2
Vehicle specific function. (e.g. Left Sliding Door, Gas Cap Release).
OFF
ON
A7 - Foot-Brake (output status)
Foot-brake output.
OFF
ON
A8 - Hand-Brake (output status)
Hand-brake output.
OFF
ON
A9 - Door Trigger (output status)
Door trigger output.
OFF
ON
A10 - Trunk Trigger (output status)
Trunk / hatch trigger output.
OFF
ON
A11 - Hood Trigger (output status)
Hood trigger output.
OFF
ON
B1 - Unlock Driver Door Only
Simulate the OEM key-fob with driver's door priority unlock on 1st unlock signal. All doors unlock on 2nd unlock signal.
OFF
ON
C1 - OEM Remote Monitoring
Send OEM remote lock & unlock commands to the remote car starter or alarm system via data-link.
OFF
ON
D2 - Unlock before/Lock after (Disarm OEM alarm)
Automatically unlock & disarm before remote-start and re-lock & re-arm after remote-start.
OFF
ON
D3 - Door Open Shutdown
Remote-starter shuts down the engine when a door is opened.
OFF
ON
D4 - Hybrid Mode
OFF
ON
D5 - Lock after start
Lock the doors after remote start.
OFF
ON
D6. Push-To-Start
Special Functions
OFF
ON
E4 - Feature 1
OFF
ON
E5 - Feature 2
OFF
ON
E6 - Feature 3
OFF
ON
E7 - Feature 4
OFF
ON
E8 - Feature 5