2016 Dodge Charger SE
EVO-All Ver.6 Firmware 74.32 with CHART6 harness
I have verified connection back to the EVO with meter. Ignition wire is one I am uncertain of. On the BCM I have metered every wire from harness A to G, I get 12V on both "pink/white" from BCM connector E.
When using either of the pink/white wires the car will turn over but die, or start n run less than 2 seconds, or till the EVO clicks again killing engine.
Please help, I planned to have this ready for Christmas.
Thank you,
Bill