Key is wrapped with 7 loops per diagram, all wiring double checked good. Veh goes into Ready Mode and shuts off with door closed. When remote start attempted ign comes on, cluster displays "clutch" then "no key" engine cranks but no start. Horn cycles and park lamps flash due to alarm triggered. Also, the power door locks are inop with the remote start fob. Park lamps respond accordingly when lock and unlock pressed but no PDL operation. Do I have to increase the Lock and Unlock pulse time in order to disarm the factory alarm which may also correct the inop PDL? Clutch bypass circuit wired correctly so not sure what's going on there and key wrapped and wired per the diagram so unsure of this issue. This is not a Push to Start veh.