All 4 CAN-bus connections were checked.
The unit was master reseted.
The unit being installed with a separate remote starter - security system (local brand) which has ground out for immobilizer bypass. And this out being connected to Fortin A8 connector.
Security system has brake pedal and push-to-start button connections which start the vehicle as a regular start. And it's working great when the original key is inside the car. So, I need to bypass the immobilizer to have remote start.
All other Fortin connections are the same as in the guide #14751 except parking light switch which is not needed for me as all external indications are going from the security system.
During programming, when the ignition is ON (step 4) I have the blue light flashes 2x times, then the red light flashes 4x times then all together (door locks opens, head lights (low beam) and internal lights flashes one time) and after all of that the blue light flashes rapidly. The unit is not programmed.
I also tried to program it with security system fully disconnected. The scenario is the same.
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
