2012 TOYOTA Corolla G-key and Fortin EVO-ALL:
Connections: Ignition 1: Connected to A1 Fortin EVO-ALL. CAN LOW: PIN 14 OBD-2 Diagnostic port to C4 Fortin EVO-ALL. CAN HIGH: PIN 6 OBD-2 Diagnostic Port to C3 Fortin EVO-ALL. Immobilizer Data: PIN 7 OBD-2 Diagnostic Port to A10 Fortin EVO-ALL. ALL other connection go trough DATALINK D2D.
Problem: Installation Procedure 5: The red light never flashes 10x times after turning the Ignition to ON/RUN Position. Waited 1 hour and the red light never flashed 10x times neither the blue light. Tried few times and 3 different EVO-ALL.
Fortin EVO-ALL was flashed previously with the firmware of car model and year suggested by Flashlink Manager: Firmware 79.12 Hardware: 6.
Somebody has a clue on how to solve this issue or what could be wrong. Thanks in advance.