Hello Jianli liu,
We have some questions...
1- Are you trying to use stand alone or is there a remote starter installed?
2- Is it the factory remote that does not lock or unlock when the car is started?
About Suziki Kizashi,do you have the other method that similar Chinese Nissan Teana. (EVO is used only bypass,STARTER will control to start the engine.)
Currently we can only do it by connecting the push start button and the brake. We have not tested any other method.
The way we do the transonder bypass with Rx and Tx would not allow the car to start if we do not do the connections of the brake and push to start button. To do connections similar to the Teana, we would need to completely redo engineering on the transponder bypass part.
This installation simulates someone starting the car. To start he car normally, you need to push on the brake and the push to start button. The EVO-ALL does the same thing.