Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

1

Evo One, 2019 Mazda CX5 Concerns

I just installed the Evo One in my 2019 CX5. I should be on the latest FW but can't recall the version number at this time. Couple of things I noticed: 1) The TPMS light is ON when remote start is activated; it goes away once I do the take over. Im ok with that but is there a fix for that. 2) "Mazda cruise control disabled under 20mph" I just learned, in forums, that this is a "known" issue. Itwas suggested to update to FW ver 85.11, does this address the issue with the error? 3) Hood open and remote start concern. I did not install the hood pin switch, but considering that I should. Just learned last night that the car DOES allow to autostart with the hood open. On my other vehicles, with Evo One, it won't autostart with the hood open. Thoughts?

0

Can the hood switch be reversed?

On my 2018 Mazda CX-9 the OEM hood switch connects to ground when the hood is closed and is an open circuit when the hood is open. If I connect this (using the THAR-ONE-MAZ3 harness) to the Fortin EVO-ONE, I will only be able to remote start with the hood open, as the Fortin is expecting a ground with the hood open and an open circuit with the hood closed. Is there a way to flash the Fortin EVO-ONE such that it will work with my stock hood switch? I do not want to drill a hole and run a new wire for a second hood switch.

0

Can the hood switch be reversed?

On my 2018 Mazda CX-9 the OEM hood switch connects to ground when the hood is closed and is an open circuit when the hood is open. If I connect this (using the THAR-ONE-MAZ3 harness) to the Fortin EVO-ONE, I will only be able to remote start with the hood open, as the Fortin is expecting a ground with the hood open and an open circuit with the hood closed. Is there a way to flash the Fortin EVO-ONE such that it will work with my stock hood switch? I do not want to drill a hole and run a new wire for a second hood switch.

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer