I recently installed an EVO-ALL in a 2014 Toyota Camry Hybrid PTS, also with a rf-kit. When programming, blue led comes on, push the start button twice to turn vehicle to on status, blue led goes out, red led starts flashing. Guide states that blue led should start flashing.
However, just incase it was a typo, I tested the remote start and it worked just fine by starting the car from the OEM fob. After shutting down the vehicle once, it will not remote start anymore.
Looking at the module, when trying to remote start, I see the blue led will flash, the red led go solid and then blue stops flashing, then after a 10 seconds the red led will go off, then flash 4 times.
FW: 79.43 Options Enabled: C1, D1, D1.6, D2, H2, D4 for Hybrid