I purchased an EVO-ALL kit with a crimestopper unit from MPC, and I have confirmed all wiring connections with a multimeter. I am able to remote start the vehicle when I hold a key up to the truck immobilizer ring in the ignition, but I am not able to perform the bypass programming successfully. I have two factory keys, one is a 40-bit S-type, the other is an 80-bit SA-type. The instructions I recieved from MPC do not call for the D connector on the EVO-ALL to be wired, however the standard installation instructions on Fortin's website for a 2009-2010 Ford F150 call for using the D connector when doing 2-key programming. Should I wire this connector in order for the bypass programming to be successfull?